CAMO Tools
Patent-pending CAMO Marksman™ tools position CAMO deck screws for side-angle entry to the deck board and provide automatic 3/16″ spacing. CAMO Marksman tools are designed for use with CAMO Hidden Fasteners only.
EDGE PRO™
Installation Instructions
- High-speed, collated hidden deck fastening system.
- For use with treated and other softwood lumber, but can be used on most types of decking.
- Heavy-duty, contractor-grade tool.
- No installed gap between boards.
- For additional gap options, can be used with secondary spacers.
MARKSMAN EDGE™
Installation Instructions
- For use with treated and other softwood lumber.
- No gap installation.
- Attaches to any drill.
- Heavy-duty, contractor-grade tool.
- For additional gap options, can be used with secondary spacers.
MARKSMAN PRO®-NB


Installation Instructions
- For use with treated, hardwood, cedar, composite and PVC deckboards.
- For narrow deckboards measuring 3-1/4″ to 5″
- Automatic 3/16″ spacing
- Dual screw guides fasten both sides of board with single tool placement
- Clamping action grips deckboard
- Heavy-duty, contractor-grade tool
MARKSMAN PRO®-XI
Installation Instructions
- For use with treated wood and other soft woods due to the shrinkage that occurs in those types of deckboards.
- Fits any 5-1/4″ to 5-3/4″ deckboard.
- Automatic 1/16″ spacing
- Dual screw guides fasten both sides of board with single tool placement
- Clamping action grips deckboard
- Heavy-duty, contractor-grade tool
MARKSMAN PRO®
Installation Instructions
- For use with treated, hardwood, cedar, composite and PVC deckboards.
- Fits any 5-1/4″ to 5-3/4″ deckboard.
- Automatic 3/16″ spacing
- Dual screw guides fasten both sides of board with single tool placement
- Clamping action grips deckboard
- Heavy-duty, contractor-grade tool
MARKSMAN®


Installation Instructions
- For use with treated, hardwood, cedar, composite and PVC deckboards.
- Fits any 5-1/4″ to 5-3/4″ deckboard.
- Automatic 3/16″ spacing.
- Designed for single deck application.
- Lightweight ergonomic design.
Comments are closed, but trackbacks and pingbacks are open.