Tiger Claw Cellular PVC Fastener – TC-P

Tiger Claw Cellular PVC Fastener – TC-P


proclip Cellular PVC Fastener

tcp_box_sml
tcp_product
tcp_bucket_sml

PRODUCT DESCRIPTIONS

300 Series Stainless steel fastener with black oxide coating to better hide fastener between boards.

PRODUCT REQUIREMENTS

TC-P Fasteners are designed to work with Cellular PVC deck boards. Be sure to use the correct fastener with your decking.

When using Tiger Claw fasteners, be sure to carefully read installation instructions to obtain optimum results. Failure to properly follow instructions may result in void of warranty.

Inspect decking material prior to installation. Omit any planks that contain hooks, twists, splits, cracks, or other defects.

Be sure to follow decking manufacturer’s recommendations for board spacing.

PRODUCT FEATURES & COMPATIBILITY

TC-P fasteners are constructed of .060 304 ¼ roll hardened stainless steel.

Designed specifically for cellular PVC decking material. TC-P will work in the following decking lumber varieties:

  • Pro Cell
  • Veka
  • EPS Plastic Lumber
IMPORTANT NOTE: TC-P should NOT be used with composite decking.

Please consult your lumber professional or ask us for recommendations first if you plan to use any other type of decking for your project.


PRODUCT SPECIFICATIONS

Origin


Connecticut
,

USA



 


 

Recommended
Materials

Use only with cellular PVC decking no less than 1” in thickness. (5/4” or thicker Procell, Veka…)

 


 

Appearance

Semi glossy black finished, flat body with circular shaped hole along lower bend. Two sets of narrow opposing prongs on top. (Non-magnetic) 


 


 

Dimensions


.50” H x 1.5” W x .9” D


 


 

Material

.060 304 ¼ roll hardened stainless
steel
Yield strength 64.5 kpsi
(approximate)
Tensile strength 145.7 kpsi (approximate) 


 


 

Finish

Black oxide with Black wax topcoat


 


 

Workability

All work can be done quickly from above using basic tools (hammer, screw gun)


 


 

Gapping

TC-P will automatically create a 1/8” space between each board.


 


 

Expansion / Contraction

Fasteners are designed to allow decking to expand and contract naturally by sliding on the fastener prongs and still maintain hold down strength. Cellular PVC decking experiences very little expansion and contraction as temperatures change.


 


 

Recommended
Screw Used

Quality Stainless steel # 7 x 1 5/8” (#1 square drive) trim head decking screws included in each box of TC-P.


 


 

Packaging


100 pieces per box
(SKU #
F-2885-PVRB)
12 – 100 piece boxes per case 

1400 piece Contractor Bucket (SKU # F-4212-TPRB)


 


 

Package
Content

Retailer Box:
(100) Tiger Claw fasteners, (105) stainless steel screws, (1) installation block, (1) installation instruction, (1) support
addendum

Contractor Bucket: (1400) Tiger Claw fasteners, (1480) Stainless Steel Screws, (5) Installation Block, (2) Installation Instruction, (2) Support Addendum, (1) Increasing Profits Booklet, (1) Instructional DVD, (1) Tiger Flyer


 

 

Retail Unit Dimensions

(100 piece box): 4.75”h x 5.50”w x 5.25”d, 2.40
lb

(1400 piece bucket): 12.0”h x 12.5”w x 12.5”d, 32 lb

 


 

Coverage

A fastener is needed at every intersection of a joist and decking board. Using 5.5” decking with 16” on center joist:

Square footage x 1.75 = Number of
Fasteners

Or, for other configurations:

Number of Decking Boards x Number of Supports = Number of
Fasteners

Number of Fasteners / 100 = Number of Boxes (round up to next even box)


Comments are closed, but trackbacks and pingbacks are open.