Best practice installation. Better protected homes.
Cap staples or cap nails, pneumatic or non-pneumatic tools, collated or hand drive, STINGER innovations provide complete roofing and sidewall fastening solutions to protect from the elements.
The CH38-2 is the economical, non-pneumatic alternative to stapling. The CH38-2 is an award-winning champion* for installing housewrap, underlayment, and rolled insulation. *Winner of the 2017 ProTool Innovation Award.
The STINGER® CH38-2 is designed for use with 3/8″ STINGER® StaplePac® only
Tool Weight: 2.6 lbs.
Fastener Capacity: 168 caps / 168 staples
Cap Type: Full 1″ plastic collated caps
Fastener Type: 3/8″ crown staples
Fastener Length: 3/8″
The CH38A delivers the holding power of a cap with the speed and ease of a hammertacker. With every swing, this airless cap system automatically advances the cap and positions it for the staple.
The STINGER® CH38A is designed for use with 3/8″ STINGER® StaplePac® only
Tool Weight: 2.9 lbs.
Fastener Capacity: 168 caps / 168 staples
Cap Type: Full 1″ plastic collated caps
Fastener Type: 3/8″ crown staples
Fastener Length: 3/8″
A premier pneumatic cap nailing innovation. When you need to quickly and safely lay down underlayment, this is the tool for you. And with a fastener capacity of 200 caps and nails, reloading is easy and efficient.
The STINGER® CN100B is designed for use with 1″ STINGER® NailPac® only
Speed: 5 cap nails per second (max. cycle rate / second)
Tool Weight: 4.9 lbs.
Fastener Capacity: 200 caps/ 200 nails
Cap Type: Full 1″ collated plastic caps
Fastener Type: Full round head; electro-galvanized ring shank
Fastener Length: 1″ x .083
The CS150B provides builders with proven performance and best practice for securing synthetic underlayment, as well as roofing felt, foamboard, and housewrap.
The STINGER® CS150B is designed for use with: 5/8″ 18ga StaplePac, 7/8″ 18ga StaplePac, 1-1/4″ 18ga StaplePac, 1-1/2″ 18ga StaplePac
Speed: 5 cap staples per second (max. cycle rate/second)cap nails per second (max. cycle rate / second)
Tool Weight: 4.2 lbs.
Fastener Capacity: 200 caps/ 200 staples
Cap Type: Full 1″ collated plastic caps
Fastener Type: 7/16″ crown staples / 18 gauge
Fastener Length: 5/8″, 7/8″, 1-1/4″ and 1-1/2″
Why Caps? Cap fasteners are a recommended best practice installation by housewrap and roofing underlayment manufacturers like GAF, DuPont, Tyvek, Grace and Titanium. Why? Because caps help seal out moisture that can penetrate sidewall and roofing fabrics. Caps provide better holding power than a nail or staple alone, and that means reduced blow-offs and lateral slippage! It also means fewer fasteners are needed to get the job done.
For use with STINGER CH38-2 and CH38A Cap Hammers only
- 12 rolls of 168 collated plastic caps
- 24 strips of A-11 3/8″ 84 staples
- Each StaplePac covers approximately 25 square
- Meets ASTM F1667
For use with STINGER CS58 Cap Stapler Only
- 10 rolls of 200 1″ collated plastic caps
- 20 strips of 100 5/8″ staples; 20ga
- Each StaplePac covers approximately 25 square
- Meets ASTM F1667
For use with STINGER CS150B and CS150 Cap Staplers only
- 10 rolls of 200 1” collated plastic caps
- 20 strips of 5/8″, 7/8″, 1-1/4″, or 1-1/2″ staples; 18ga
- Each StaplePac covers approximately 25 square
- Meets ASTM F1667
For use with the STINGER CN100B or CN100 only
- 10 rolls of 200 1″ collated plastic caps
- 10 coils of 200 1″ 304 Stainless Steel ring shank nails
- Each NailPac covers approximately 25 square
- Meets ASTM F1667
